King Air C90 Products

C90 Captain Left Panel

Dimensions: 286mm (wide) x 160mm (high)

Backlit Panel with parts as shown - US$368-00

When supplied as a fully-assembled unit, this fully-backlit panel will include all of the switches, the vinyl switch caps, the engraved hinged gang-plate, black mounting screws, two pull on/push off switches, the Parking Brake knob, and the Pilot Air knob.

C90 Captain Right Panel

Dimensions: 285mm (wide) x 160mm (high)

Backlit Panel with parts as shown - US$577-00

When supplied as a fully-assembled unit, this fully-backlit panel will include all of the switches, the vinyl switch caps, the pushbuttons, a dummy circuit breaker, black mounting screws, a pull on/push off switch, the Defrost Air Knob, a wired pushbutton for gear indication, as well as the landing gear lever complete with embedded LED and wiring for illumination.  The gear lever is spring loaded and you must pull the knob out before it can be moved from its current position; when it gets to the new position, it springs back into place. A red LED is embedded in the  gear knob to allow for illumination during gear transit, and a pair of connection wires are also included.

C90 First Officer Left Panel

Dimensions: 285mm (wide) x 160mm (high)

Backlit Panel with parts - US$285-00

When supplied as a fully-assembled unit, this fully-backlit panel will include all of the switches, the vinyl switch caps, black mounting screws, a dummy gauge, a pull on/push off switch, the Cabin Air knob, and knobs for the Cabin Temp, Cabin Temp Mode, and Fire Det & Fire Ext.

C90 First Officer Right Panel

Dimensions: 286mm (wide) x 160mm (high)

Backlit Panel with parts as shown - US$199-00

The mounting holes for the gauges in this fully-backlit panel are suitable for use with either our standard dummy gauges or the GSA-057 gauges from Flight Illusion. All of the black mounting screws are supplied (including for the gauges), as is the large toggle switch, the pull on/push off switch, and the Co-Pilot Air knob. A full set of our dummy gauges is included with this panel.

C90 Fuel Panel

Dimensions: 252mm (wide) x 97mm (high)

Backlit Panel with parts as shown - US$227-00

When supplied as an assembled unit, this fully-backlit panel will include all of the switches, the vinyl switch caps, a pair of our dummy gauges, and all of the black mounting screws (including for the gauges).The gauge holes are suitable for use with either our own standard dummy fuel gauges or with the GSA-061 gauges from Flight Illusion.

 

Please note that the housing shown in the centre photo is for demonstration purposes only.

C90 Fuel Circuit Breaker Panel

Dimensions: 252mm (wide) x 102mm (high)

Backlit Panel with parts as shown - US$209-00

When supplied as a fully-assembled unit, this fully-backlit panel will include all of the dummy circuit breakers and decals, the black mounting screws, two large toggle switches, and the missile covers.

C90 Upper Overhead Panel

Dimensions: 380mm (wide) x 169mm (high)

Backlit Panel with parts as shown - US$441-00

When supplied as a fully-assembled unit, this fully-backlit panel will include all of the potentiometers, the large rocker switch, the rotary switch, all of the knobs, and all of the black mounting screws.

 

Please note that the housing shown in the centre photo is for demonstration purposes only.

C90 Lower Overhead Panel

Dimensions: 380mm (wide) x 76mm (high)

Backlit Panel with parts as shown - US$247-00

When supplied as a fully-assembled unit, this fully-backlit panel will include a momentary pushbutton,  a rotary switch, an engraved knob, all of the mounting screws (including for the gauges), as well as a full set of our dummy gauges. The gauge holes are suitable for use with either our own standard dummy gauges or with the GSA-057 gauges from Flight Illusion.

 

Please note that the housing shown above is for demonstration purposes only.

C90 Pedestal Gauge Panel

Dimensions: 210mm (wide) x 143mm (high)

 Panel w/parts - US$85-00

This panel is supplied with the three dummy gauges. The gauge hole diameters are 57mm.

 

When supplied as a fully-assembled unit, this panel will include a set of our dummy gauges and all of the black mounting screws.

C90 Lower Pedestal Panel

Dimensions: 264mm (wide) x 175mm (high)

Backlit Panel with parts - US$335-00

When supplied as a fully-assembled unit, this fully-backlit panel will include a complete Cabin Altitude Panel, the momentary pushbuttons, all of the mounting screws, a miniature toggle switch, the miniature rocker switch, a rotary encoder, the indicator LED, and a knob.